END MILLS FOR HARDENED STEELS 45-70 HRC
FEATURES
- Superior raw material with nano grain structure
- Hardened moulds with a multilayer coating.
- Optimum chip flow geometry
- Finishing with close tolerance end mills for greater accuracy
BENEFITS & FUNCTIONS
- EDM is not necessary because milling is a much faster operation.
- uses hard materials and high cutting speeds.
- AVAILABLE RANGE Standard 0.1mm- 25mm in stub, standard, long, extra long, and long reach
- Specials Available in stub, standard, long, extra long, and long reach, 0.1mm to 32mm.
END MILLS FOR STAINLESS STEEL, SUPER ALLOYS & EXOTIC MATERIALS
FEATURES
- Pitch and Helix Variability
- Consistent core geometry
- A more efficient centre cutting geometry
- Contemporary coating
BENEFITS & FUNCTIONS
- Increased productivity
- Due to the reinforced core, it can operate at high parameters.
- Excellent Tool Life.
- Outstanding Surface Finish.
- RANGE: Standard 3mm- 20mm / Standard Finishing Special 0.4mm-12mm, 0.4mm-25mm
END MILLS FOR GRAPHITE MILLING
FEATURES
Raw material with superior nano grain structure
Hardened moulds with multilayer coating and diamond Milling coating for graphite
Grade of wear resistance
The best chip flow geometry
Finishing end mills with tight tolerances for greater accuracy
Roughing Pitch Designed for Graphite Roughers
FUNCTIONS & BENEFITS
Milling is a much faster operation than EDM and can operate at high cutting speeds on hardened materials.
Hardened die polishing can be reduced.
There is no need for multiple setups; the job can be completed with a single clamping and high accuracy is much easier to achieve.
Increased tool life and consistency
Productivity is high.
Surface finish in graphite moulds is superior.
RANGE
RANGE 0.1mm to 25mm in stub/standard/long/extra long/long reach
Specials 0.1mm to 32mm in stub/standard/long/extra long/long reach
END MILLS FOR HIGH TEMPERATURE ALLOYS (TURBO – TR)
FEATURES
Variable helix and variable pitch
Core geometry that is stable
Center cutting geometry has been optimised.
Coating of the next generation
Available in four, five, six, and seven flutes.
Neck options are available.
BENEFITS AND FUNCTIONS
Increased output
The reinforced core allows you to work at higher parameters. Longer tool life.
Surface Finish is excellent.
LARGE MRR
RANGE
6mm – 20mm standard
Specials 1.5mm – 25.4mm
END MILLS FOR GENERAL PURPOSE
FEATURES
Excellent choice for use on a variety of materials.
Special nano grain carbide raw material with an optimal hardness and toughness balance
Better feed rates and longer tool life due to special geometry
TiAlN coating with high performance for superior wear resistance
BENEFITS AND FUNCTIONS
Best overall value
Steel, stainless steel, cast iron, and aluminium are the best choices.
RANGE
Available in stub/standard/long/extra long/long reach sizes ranging from 1mm to 25mm.
Special Stub/standard/long/extra long/long reach sizes range from 0.3mm to 32mm.
RAZOR CUT SERIES FOR ALUMINIUM
FEATURES
3 Flutes
Center Cutting
Coarse Pitch
Roughing for Aluminium
Uncoated
FUNCTIONS & BENEFITS
High MRR
Provide excellent roughing and finishing of Aluminum.
Superior Tool life span.
RANGE
Standard 6mm – 25mm available in regular/long reach
Specials 4mm – 25mm available in regular/long reach
ROUGHERS AND FINISHERS (CHIP BREAKER)
FEATURES
3-4 Flutes
Center Cutting
Sinosoidal Pitch
Superior Coating
FUNCTIONS & BENEFITS
High MRR
Stable cutting at high cutting speeds
Superior Tool Life
RANGE
Standard 8mm – 20mm available in standard
Specials 6mm – 25.4mm available in standard
END MILLS FOR TROCHOIDAL MILLING
FEATURES
Solid core design
For High Productivity, Multiflutes
An alternative coating available.
BENEFITS & FUNCTIONS
HIgh cutting speed operation.
Geometry that is engineered to accommodate efficient material removal at different engagement angles.
Highest rates of dynamic speed.
Highest rate of material removal.
Minimised cutting forces.
Longer tool life because of less shock.
High cycle time savings when compared to the standard milling approach.
RANGE
3mm–20mm Standard Roughing.
Special—3 mm to 25 mm.
